Customers compare tla7901 to these similar products
Products Featured in this Video
Speaker 1: Today we're going to be taking a look at the TorkLift Lock and Load Sidekick. As you can see, we've got it installed in the truck here. It's going to be a generator carrier design for use with 2" by 2" hitches, part number TLA7091.Now the generator carrier is going to have a few benefits to it. One, it allows us to get our generator out of our camper or out of our truck, so we… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, your Champion 200961 will fit the TorkLift Lock and Load SideKick Cargo Tray #TLA7901. The inside dimensions of the tray are 21-1/4" long x 16-1/8" wide x 3-15/16" deep. The 200961 is 17.3" long x 12"…
view full answer...The tray dimensions of the #TLA7752 are 27-3/4" long x 24" wide and the strap adjustment range is 13-3/4" long x 6-3/4" wide x 13-1/4" tall as a minimum and 27-3/4" long x 23-1/2" wide x…
view full answer...It looks like there are a couple of different Honda 3000 generators. Based on the length, width, and height of those you could use the TorkLift Lock and Load carrier #TLA7752. The tray measures 27-3/4 inches by 24 inches. I have linked a video…
view full answer...Yes, the TorkLift Lock and Load SideKick #TLA7901 that you referenced will fit a Honda 2200 generator like you mentioned. We had the chance to fit one on this carrier and it worked well. See attached picture. It's also in the review video…
view full answer...The internal dimensions of the TorkLift Lock and Load SideKick part #TLA7901 are as follows: 21" long x 16" wide x 18-1/2" tall. You will need to measure your Generac IQ2000 and compare it to the above in order to determine if this…
view full answer...Hitch pins do not have weigh capacities because they do not actually support any of the weight of the trailer. When there is 10-15% of the tongue weight of a trailer's total weight applying vertical force on the ball mount it actually is so bound…
view full answer...To carry your Honda EU3200i generator the only option is a hitch-mounted carrier from TorkLift: - TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches #TLA7901 The #TLA7901 is designed to carry your exact generator and you can either mount…
view full answer...I attached a link to this page (down below the product links), that has the instructions for the Curt Front Hitch part #C31076 that you referenced. This is a confirmed fit for your 2017 Toyota 4Runner TRD so it would be a great fit.
view full answer...The TorkLift Lock and Load SideKick Cargo Tray, part #TLA7901, can carry any generator that fits on it. The generator needs to have a center handle and be no more than 16 inches wide and 21-1/4 inches long. For the height there are three different…
view full answer...The #FV807357 Fan-Tastic Vent Roof Vent Assembly Upgrade Kit will work for your 2019 Lance 2185 Travel Trailer if the opening meets the requirements. In order to install this vent, you must have a 14-1/4" x 14-1/4" opening approximately in…
view full answer...The Curt Adjustable Width Trailer Hitch Receiver #13703 referenced in your question is a universal type hitch that is designed specifically for RVs and trailers like yours. It will fit frame widths of 22 to 72 inches and work on box, C-channel, and…
view full answer...I spoke with my contact at Tork Lift and he informed me that the TorkLift Lock and Load #TLA7752 that you referenced has a 500 lb capacity. I attached a review video for you to check out as well.
view full answer...