Filter Products
Filter Results
$170.00 - $1,299.99
$245.56 - $1,399.99
Filter by Tube Shape
$170.00 - $1,299.99
$245.56 - $1,399.99
Videos
for Gooseneck Coupler
Help Articles
for Gooseneck Coupler
Expert Answers
for Gooseneck Coupler
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make…
view full answer...I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque,…
view full answer...We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will need…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
view full answer...The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue…
view full answer...Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it…
view full answer...Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY83XR is specially designed to work with the Ram factory puck system. It will push the connection point for the gooseball and your trailer back…
view full answer...The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 measures 4-1/2 inches in diameter on the outside and the Safety Chains #AM3109 fit around the adapter, as you can see in the accompanying photo. So as long as your gooseneck…
view full answer...It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub #AKIHUB-545-35-G-K…
view full answer...I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do…
view full answer...Videos
for Gooseneck Coupler
Help Articles
for Gooseneck Coupler
Expert Answers
for Gooseneck Coupler
Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year…
view full answer...I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque,…
view full answer...We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
view full answer...The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance…
view full answer...Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it…
view full answer...Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY83XR is specially designed to work with the Ram factory puck system. It will push the connection point for the gooseball and your trailer back…
view full answer...The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 measures 4-1/2 inches in diameter on the outside and the Safety Chains #AM3109 fit around the adapter, as you can see in the accompanying photo. So as long as your gooseneck…
view full answer...It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub…
view full answer...I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said,…
view full answer...